Shower Head Installation Instructions

Follow the steps below to install your CircleSplash shower head quickly and easily.

Video Instructions

What You'll Need

• Adjustable needle nose pliers
• Plumber's tape (Teflon tape)
• A cloth or towel

Step-by-Step Installation

1. Remove your old shower head — Turn it counterclockwise to unscrew it from the shower arm. Use a cloth to protect the finish if using pliers.
2. Clean the shower arm threads — Remove any old tape or residue from the threads.
3. Apply plumber's tape — Wrap the threads clockwise 2–3 times to ensure a watertight seal.
4. Attach your CircleSplash shower head — Hand-tighten first, then use a wrench for a snug fit. Do not overtighten.
5. Test for leaks — Turn on the water and check for any drips around the connection. Tighten slightly if needed.

Need Help?

If you have any questions, contact us at admin@circlesplash.com.